- Aleader Industrial Co.,Ltd
- This is a verified supplier can provide quality products and have passed the Business License Check.
Home>Products>VONTEX Ro Membrane>VNT-SW-400 ro membrane replaced TM820M-400 reverse osmosis membrane
English
VNT-SW-400 ro membrane replaced TM820M-400 reverse osmosis membrane
- VONTEX
VNT-SW-400
- China
- CE.ISO
- 10 pieces
- 400-450 dollar per piece
- 4 piece per carton
- within 7-15 working days
- 10000 pieces per month
- Ivan Xu2020-07-10 09:46:19
Welcome to my shop! Glad to serve you! Please send your question!
Product Details
Model: | VNT-SW-400 | Active Membrane Area ft2(m2): | 400(37.2) | Permeate flow GPD(m3/d): | 7500(28.4) |
Stable Rejection Rate %: | 99.8 |
Product Description
Brief Introduction
SW series of sea water aromatic polyamide RO element developed by ALEADER for seawater desalination. This series of elements have the characteristics of low operating pressure, low equipment investment, good desalination performance and stability.
SW series membrane elements are generally suitable for the treatment of seawater and brackish water with high concentration. It can be used for seawater desalination, desalination of brackish water with high concentration, boiler replenishment water in power plants, wastewater reuse, concentration and recovery of high value-added substances such as food and pharmaceuticals, etc
1. All data and information provided in this manual have been obtained from long-term experiment by Aleader. We confirm the effective and accuracy of the data .Aleader assumes no liability for any aftermath caused by user’s failure in abiding by the conditions specified in this manual in use or maintenance of membrane products. It is strongly recommended that the user shall strictly abide the designed use and maintenance requirements and keep relevant records.
2. The permeate value listed in the table is the average value. The permeate flow of single membrane element is tolerance not exceeding ±20% of the nominal value.
3. All wet-type membrane elements have been strictly tested before leaving the factory, and have been treated with 1.0% sodium hydrogen sulfite (10% glycerin antifreeze required in winter) for storage purpose, then sealed with plastic bag in vacuum, and further packed in carton boxes.
4. The membrane used should remain wet after being used; In long term suspension, to prevent the breeding of microbes, soak the membrane elements with protective solution is highly recommended, the solution (prepared with RO filtered water) containing 1.0% sodium hydrogen
sulfite (foodstuff-purpose).
5. Operate low pressure flushing for 15-25 minutes of first use, high pressure flushing for 60-90 minutes when first use (Permeate volume no less than 50% of designed volume). Discard all the permeate and condensed water produced during the first one hour after system start-up.
6. During storage time and operation period, it is strictly prohibited to added any chemical medicament that may be harmful to membrane elements. In case of any violation in adding chemical medicament,Aleader assumes no liability for any damages incurred.
7. Along with technical development and product renovation, all information will be subject to modification without prior notification
Contact Us
- Aleader Industrial Co.,Ltd
- Email[email protected]
- Address15A029, Building C, No.3 Langjing Road, Xinshi Community, Dalang Street, Longhua District, Shenzhen
- Phone(Working Time)+8618701811076
- WhatsApp+8618701811076
Related News
VONTEX Ultrafiltration Membranes Introduction |
What is the difference between reverse osmosis and nanofiltration? |
How to solve the problem of concentration polarization in ultrafiltration process? |