- Aleader Industrial Co.,Ltd
- This is a verified supplier can provide quality products and have passed the Business License Check.
Home>Products>VONTEX Ro Membrane>VNT-LP-400 ro membrane for 2000 ppm water treatment
VNT-LP-400 ro membrane for 2000 ppm water treatment
- VONTEX
VNT-LP-400
- China
- CE,ISO
- 10 pieces
- 210-230 dollar per pieces
- 4 pieces per carton
- within 15 working days
- L/C,D/A,T/T
- 10000 pieces per month
- Ivan Xu2020-07-10 09:46:19
Welcome to my shop! Glad to serve you! Please send your question!
Product Description
LP series (Low pressure) aromatic polyamide ro element is developped by Aleader Company for treatment of surface water and underground water.its operation pressure is about 2/3 of low pressure membrane,and the rejection rate can reach 99.5%.Thus it can reduce the investion cost of related pump,pipelines,containers and other equipnents and the operation cost of Ro system,
PF-LP-400 Ro Membrane Element LP series Ro membrane normally suitable for treatment of surface water, underground water and municipal water with TDS is less than 2000 ppm.It is mainly applied in preparing bottle water, drinking water,boiler replenishment water,food processsing and pharmaceutical manufacturing industries and other fields.
1. All data and information provided in this manual have been obtained from long-term experiment by Aleader. We confirm the effective and accuracy of the data. We assume no liability for any consequences of user’s failure in abiding the conditions specified in this manual in use or maintenance of membrane products. It is strongly recommended that the user shall strictly abide the designed use and maintenance requirements and keep relevant records.
2. The permeate value listed in the table is the average value. The permeate flow of single membrane element is tolerance not exceeding ±15% of the nominal value.
3. All wet-type membrane elements have been strictly tested before leaving the factory,and have been treated with 1.0% sodium hydrogen sulfite (10% glycerin antifreeze required in winter) for storage purpose, then sealed with plastic bag in vacuum, and further packed in carton boxes.
4. The membrane used should remain wet after being used; In long term suspension, to prevent the breeding of microbes, soak the membrane elements with protective solution is highly recommended, the solution (prepared with RO filtered water) containing 1.0% sodium hydrogen sulfite (food grade).
5. Operate low pressure flushing for 15-25 minutes of first use, high pressure flushing for 60-90 minutes when first use (Permeate flow no less than 50% of designed flow). Discard all the permeate and concentrated water produced during the first one hour after system start-up.
6. During storage and operation period, it is strictly prohibited to add any chemicals that may be harmful to membrane elements. In case of any violation in adding chemicals,Aleader assumes no liabilities for any damages incurred.
7. Along with technical development and product renovation, all information will be subject to modification without prior notification. Please keep notice of our website for any updates of the product.
Contact Us
- Aleader Industrial Co.,Ltd
- Email[email protected]
- Address15A029, Building C, No.3 Langjing Road, Xinshi Community, Dalang Street, Longhua District, Shenzhen
- Phone(Working Time)+8618701811076
- WhatsApp+8618701811076
Related News
VONTEX Ultrafiltration Membranes Introduction |
What is the difference between reverse osmosis and nanofiltration? |
How to solve the problem of concentration polarization in ultrafiltration process? |